SLEVA-DISCOUNT-Etch (For Bare Metal Parts) - 2 Pack GLOSS Clearcoat System (2K Urethane) 220ml - Zero Paints

Etch (For Bare Metal Parts)  – 2 Pack GLOSS Clearcoat System (2K Urethane) 220ml

This is perfect for applying to bare metal parts to always keep the shine, it stops them oxidizing and going dull over time

Ensure the metal surface is clean and dry, if in doubt wipe the surface with Anti-Silicone Degreaser / Panel Wipe – ZP-3027 . Apply 2 or more single coats of Lacquer alowing 5–10 mins between coats. If appling over decals, apply a few  light dust coats to seal the decals before appling wet coats. this has been tested on all the major model brands but please test YOURSELF on some scrap decals/model. A downloadable application guide  can be downloaded from www.zero-paints.com

Pack Contents :

  • 1 × 100ml Etch Clear Coat (High Solid)  also known as Urethane or Polyurethane (Supplied in Glass Bottle)
  • 1 × 60ml Hardener (Supplied in Glass Bottle)
  • 1 × 60ml Thinners (Supplied in Glass Bottle)
  • Instructions

Mixing Ratio
100 Parts Clear, 50 Parts Hardener + 10% Thinners

(e.g. 20ml Clear, 10ml Hardener + 3ml Thinners).
Drying Times : Air Drying  at 20°C, Dust Free 30 Mins, Tack Free : 10–12 Hours, Thoroughly Dry : 48 Hours. Can be polished after 12 hours at 20 °C

Code ZP-3038
Producer Zero Paints
Common price 28,54 €
Discount -21% (-6,09 €)
Your price22,45 €
on stock 5 pcs
+